I started out putting the rib on a piece of cardboard until I could pick up the mess and re-boot my thoughts for a minute. Then I set it on a piece of craft tag board and finished it up.
Sunday, January 19, 2014
Final nailing and assembly of ribs (back side) - Part 2
Once the top side is done I pull the wedges out and gently pry/lift the wing rib from the jig. The back side is similar except you are starting out with no gussets sitting on the rib itself. Instead, and you can see in the photo, I just have a pile of remaining gussets to pick from.
I started out putting the rib on a piece of cardboard until I could pick up the mess and re-boot my thoughts for a minute. Then I set it on a piece of craft tag board and finished it up.
I started out putting the rib on a piece of cardboard until I could pick up the mess and re-boot my thoughts for a minute. Then I set it on a piece of craft tag board and finished it up.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment