Oldfield Baby Great Lakes Biplane

Sunday, January 19, 2014

Building ribs - Rinse, Wash & Repeat

Just keep on trucking, almost done and then off to build the wing root ribs!



Posted by Unknown at 6:28 PM
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

No comments:

Post a Comment

Newer Post Older Post Home
Subscribe to: Post Comments (Atom)

Blog Archive

  • ▼  2014 (23)
    • ►  February (5)
    • ▼  January (18)
      • Building ribs - Rinse, Wash & Repeat
      • Up close photos of gussets and ribs after epoxy dries
      • Final nailing and assembly of ribs (back side) - P...
      • Final nailing and assembly of wing ribs (jig side)...
      • Spreading epoxy on gussets and rib cap strips
      • Pre-assembling rib gussets on the rib jig (no glue...
      • Nails and pre-nailing gussets
      • Epoxy break test before building wing ribs
      • Using the patience stick & sanding gussets
      • The "Patience Stick" - A tool to grind gussets and...
      • Marking and cutting gusset patterns
      • Making patterns for wing rib gussets
      • Spar shim and wedges on the rib jig
      • Cutting out internal rib supports and making patterns
      • Assembling the first parts in the rib jig
      • Wedges for keeping the rib parts tight in the rib jig
      • Cutting the trailing edge of the pre-glued nose ri...
      • Building the rib jig for the Baby Great Lakes Biplane
  • ►  2013 (6)
    • ►  December (6)

About Me

Unknown
View my complete profile
Simple theme. Powered by Blogger.